LQ6D22008RED 1/2 HB Valved In-Line Insert - Red
Main Features:
	- Non-Spill Design
- Redundant Multi-Lobed Seals
- High Flow Capacity with Low Pressure Drop
- EPDM Or FKM Seals
- Ergonomic Body and Latch Design
- Colour Coding
- Low Profile
- Barbed & Threaded Terminations
Main Benefits:
	- Disconnect Under Pressure with no Spills
- Extra Protection from Leaks over an Extended period of Time.
- Efficient, Cost-Effective Cooling System
- Options Support common coolants used in liquid cooling applications (i.e., Glycol/Water, Mineral Oil, Synthetic Oils, Electro cool)
- Simple, Intuitive One-Handed Operation of Latch. Audible Click Signals Secure Connection
- Instant Visual Identification of Cooling Lines.
- Meets size requirements for Space- Constrained Electronics
- Compatibility with various tubing options including reinforced tubing.
 Main Specifications: 
 - Material: Brass
- Material
     Finish: Chrome
- Pressure
     Range: Vacuum to 120 psi, 8.3 bar
- Color: Metallic
     with warm red
- Mounting
     Option: Free Floating
- Temperature
     Range: 0°F - 240°F (-17°C - 115°C)
- Seal
     Options: EPDM
- Valve
     Spring: 302 Stainless Steel
- Valve
     Option: Valved
- Body
     Type: Inserts
- Shipping/Storage
     Temperature Range: -40°F to 240°F (-40°C to 115°C)
- Spillage: Spillage
     is 0.03 cc per disconnect at 0 psi and   0.03 cc per disconnect rated
     at 120 psi;  Inclusion 0.04 cc per connect
- Bag
     Qty: 10
| TERMINATION | IN-LINE HOSE BARB | 
| TUBING/THREAD SIZE | 1/2" ID | 
| METRIC EQ | 12.7mm ID | 
| SHUTOFF | LQ6D22008RED | 
| A(Height/Diameter) | 1.0 (25.3) | 
| B (Total Length) | 2.56 (65.0) | 
| C(Connected length) | 0.65 (16.4) | 
*All measurements are in inches (millimetres) unless otherwise noted.