Sterling Pressure System, a trusted name in manufacturing reliable products since 1992, is known for its innovative solutions and high standards. Among their line-up of exceptional products, the Infinity Auto-Changeover stands out, offering an array of automated features and versatile configuration options. In this blog, we’ll explore the Infinity Auto-Changeover, a crucial addition for maintaining an uninterrupted gas supply in various industries.
The Infinity™ Auto Changeover is designed to automatically switch to a replacement cylinder when one is exhausted, ensuring a continuous and hassle-free gas supply. This blog will guide you through the key considerations while connecting your device to the Infinity Auto-Changeover, making your installation and use as seamless as the gas supply it provides.
Want to explore more? Must visit at: https://www.natronequipments.com/
The Infinity Auto-Changeover offers various configurations, enhancing its efficiency and versatility:
- Infinity Auto Changeover cylinders are available with or without 2PAK, 4PAK, 6PAK, 8PAK, or 10PAK hoses.
- The 4PAK configuration allows for fine pressure adjustments, thanks to a third-party regulator. Additionally, when connected to secondary regulators, the INFINITY features 2 internal piston regulators that can supply these secondary units without the need for a primary source.
- This also simplifies system expansion by accommodating additional hoses and fittings as needed.
Connecting Your Infinity Auto-Changeover: Key Points to Remember
A smooth connection to the Infinity Auto-Changeover is crucial to optimize its performance and ensure safety. Here are the essential points to keep in mind:
Prior to Joining Your Device
- Suitable Gas Usage: This unit is designed for inert gases and not intended for oxygen service. It’s best suited for high-pressure CO2 and Nitrogen cylinders. Do not use it with low-pressure CO2 bulk tanks or cryogenic nitrogen.
- Positioning: Verify the location where you intend to place the Infinity Auto-Changeover.
- Fittings: Ensure that all hoses have appropriate fittings for a secure connection.
- Hose Length: Make sure all hoses are of the proper length to reach your setup.
- Proper Installation: Establish hoses on the changeover, using enough plumber’s tape to create a secure seal.
- Inlet Pressure: Determine the inlet pressure and ensure it doesn’t exceed the 3000 psi maximum pressure rating of the Infinity Auto-Changeover.
Infinity Auto-Changeover Installation
- Connect Regulators: Attach the final pressure regulator, manifold, or hose to the low-pressure outlet below the priority selection knob.
- Cylinder Hoses: Attach the cylinder hoses to the CO2 or N2 cylinders.
- Select Priority: Turn the priority selection knob to choose the cylinder(s) you want to draw from first.
- Leak Check: After installation, turn on the supply and perform a thorough “check for leaks.”
Must try this: https://www.natronequipments.com/soft-drink-industry/sterling-infinity-CO2-N2-auto-changeover
Cylinder Changeout
Replace Empty Cylinders: When cylinders are empty, replace them and rotate the knob 180 degrees. Your reserve cylinder will now become your main supply, leaving a full reserve cylinder. The changeover is automatic and occurs internally. The “Priority Select” knob enables you to choose the primary source.
Conclusion
The Infinity Auto-Changeover from Sterling Pressure System is a game-changer when it comes to maintaining a steady gas supply. Following these key points during the installation process ensures a smooth experience and optimal performance. This ingenious device simplifies the management of gas cylinders, offering continuous supply and peace of mind. Whether you’re in a busy industry or just seeking a reliable gas supply, the Infinity Auto-Changeover is here to keep your operations flowing seamlessly.
