Gicar flow meters are without a doubt the best on the market. These sensors track the amount of espresso an automatic espresso machine has dispensed. Flow meters with 3 prongs, which are ungrounded, are usually connected using a block connector.
In addition to coffee machines and automatic beverage dispensers, Gicar flow meters are suitable for water dispensers and water treatment equipment.
Each model is suitable for food contact and comes in two versions:
- High Pressure: Made from brass (low lead content), with several kinds of treatment or coating, or materialized in plastic.
- Low pressure: purely plastic
Must Visit:
https://www.natronequipments.com/brand/gicar.html
Flow meters do not have a voltage requirement:
In this flow meter, there are 3 straight connectors and an LED that indicates whether the flow meter is functional. It is made of stainless steel and has straight 3 connectors. The meters on most coffee machines have a 1/4″ fitting.
When should the flow meter be replaced?
- The group is not supplying water
- When the panel’s display no longer shows
- Having trouble using the volumetric button
- In the LED, the light is no longer on
How to replace the flowmeter by turning off the main water valve at the stopcock?
- Disconnect existing flow meter connector wires–pay attention to where the earth terminals and live terminals are located.
- Remove the old flowmeter and fittings.
- Reconnect the wires and replace the old fittings on the new flowmeter.
- Use Teflon tape to ensure a watertight seal.
This type of flowmeter is compatible with a variety of machines. Here are a few of them:
Astoria CMA:
Adria, Argenta, Brava, Calypso, CK, CKE, CKX, CKXE, Denise, Divina, Dora, Gloria R12, Lisa, Perla 4D, Plus 4 you, Pratic, Pratic New, Sibilla
Bezzera:
B2000, B2006, B2009-Compact, B2013, B3000, B4000, B6000, BZ35, BZ40, C2013 Compact, EBBIS, Ellisse, Galatea, Proex, Verticale
BFC:
Classica, Delux, Lira, Maranello, Monza, Opera
CARIMALI:
Cento50, E9, ETA Beta, Kikko
CIMBALI:
M15, M20, M22, M27, M28, M29, M30, M31, M32
ELEKTRA:
Classic, Kappa, Modern, Sixties
Sum Up: If you need to buy Flowmeters for your coffee machines, it is the best option to buy Gicar flowmeters. A variety of machines can use flowmeters like these. If you have any doubts or queries you can simply contact NESPL through their website to get the best assistance.
