PE-12-EI-0500F-R , 3/8” TUBE RED-(500FT ROLL)

#NSSP003726

Product Description

PE-12-EI-0500F-R , 3/8” TUBE RED-(500FT ROLL)

Plastic tubing from the John Guest PE Range is made from linear low density polyethylene. In addition to hot water applications, it can be used to provide cold water as well as intermittent hot water. The materials used in John Guest products comply with FDA regulations and are certified by NSF International Standards 51 & 61. A great deal of chemical resistance can be found in John Guest LLDPE tubing. This test is conducted in accordance with ASTM D-1693 (10% IGEPAL).

MAIN FEATURES:

- 3/8" O.D. (Outside Diameter)
- Designed for cold and intermittent hot water applications made of LLDPE (Linear Low Density Polyethylene)
- Made of FDA certified and NSF approved materials
- Excellent resistance to cracking due to environmental stresses
- Black Tubing is UV Stabilized
- Rated at 230 PSI @ 70 Degrees F (15 bar @ 20 Degrees C)/120 PSI @ 150 Degrees F (8 bar @ 85 Degrees C)
- Maximum Working Temperature
- There is a three-fold difference between the working pressure and the burst pressure
- Compatible with all Quick-Connect fittings, including those from John Guest

SKU	Tube OD	Tube ID	Length	Minimum Bend Radius
PE-08-BI-DF-N	1/4 in. (0.250 in.)	0.170 in.	500 ft.	1.00 in.
PE-08-BI-1000F-N	1/4 in. (0.250 in.)	0.170 in.	1,000 ft.	1.00 in.
PE-10-CI-0500F-N	5/16 in. (0.312 in.)	0.187 in.	500 ft.	1.13 in.
PE-12-EI-DF-N	3/8 in. (0.375 in.)	0.250 in.	500 ft.	1.25 in.
PE-16-GI-CCLF-N	1/2 in. (0.500 in.)	0.375 in.	250 ft.	2.50 in.
PE-04025-0100M-N	4 mm.	2.5 mm.	100 m.	25 mm.
PE-0604-0100M-N	6 mm.	4 mm.	100 m.	25 mm.
PE-0604-0300M-E	6 mm.	4 mm.	300 m.	25 mm.
PE-0806-100M-N	8 mm.	6 mm.	100 m.	30 mm.
PE-1007-100M-N	10 mm.	7 mm.	100 m.	32 mm.
PE-1209-100M-N	12 mm.	9 mm.	100 m.	63 mm.
PE-15115-0100M-B	15 mm.	11.5 mm.	100 m.	100 mm.