The Aquatec 25-184 strainer is a critical component for protecting your pump system from clogging and contamination. Designed with a 50-mesh stainless steel screen, Viton gasket, and 3/8″ hose barb, it ensures debris doesn’t damage your pump or compromise system performance.
Used widely across industries, including beverage processing, agriculture, automotive, and industrial maintenance, this strainer is built for durability and ease of maintenance. But like any filtration component, regular cleaning is essential to ensure it keeps doing its job.
For any doubt & Query write us at: sales3@natronequipments.com
Here’s how to clean your Aquatec 25-184 strainer properly.
Step-by-Step Cleaning Instructions
1. Turn Off the System
Before you begin, power down the pump and depressurize the system. This step is essential to prevent accidents and ensure safe handling of the components.
2. Disconnect the Strainer
Carefully detach the strainer from the hose barb fittings. If your setup uses quick-connect fittings, release them according to the manufacturer’s instructions to avoid damaging the connectors.
3. Remove the Mesh Screen
Unscrew or twist off the strainer cap (depending on your model) and take out the stainless-steel mesh screen. Be gentle, bending or warping the mesh can compromise its effectiveness.
4. Clean the Components
Rinse both the screen and housing with clean water. If there’s any stubborn residue, use a soft brush and mild dish soap. Avoid abrasive cleaners or harsh chemicals, which could damage the gasket or screen material.
5. Inspect for Damage
Look for tears in the mesh, worn gaskets, or any cracking around the housing. If you notice damage, replace the damaged part immediately to avoid performance issues or contamination.
6. Reassemble and Reinstall
Once all parts are clean and dry, reassemble the strainer. Make sure the screen and gasket are properly seated, and reconnect the strainer to the system. Tighten fittings firmly but avoid over-tightening, which can cause cracks or leaks.
Maintenance Tips
- Clean regularly: Depending on how frequently your system runs or the type of fluid used, clean the strainer every 1–3 months.
- Don’t over-tighten: Excessive force during reassembly can damage threads or fittings.
- Use original parts: Always replace worn components with Aquatec-approved or compatible spare parts to maintain proper function.
Uncover more insights: https://www.natronequipments.com/
Chemical Compatibility
While the Aquatec 25-184 strainer is UV-resistant and suitable for a variety of liquids beyond water, not all chemicals are safe to use with its materials. Before using it with non-standard liquids, check compatibility with Aquatec’s official chemical guide to avoid gasket degradation or housing failure.
Highly Recommended: https://www.natronequipments.com/soft-drink-industry/soft-drink-machines-spare-parts/parts-accessories/25184-aquatec-strainer-nssp000283.html
Final Word
Keeping your Aquatec 25-184 strainer clean isn’t complicated, but neglecting it can cause serious issues. Regular maintenance helps maintain consistent flow, extend the life of your pump, and ensure the reliability of your entire system.
And when it’s time to replace worn or damaged parts, NESPL (Natron Equipment & Spares Pvt. Ltd.) is your trusted source for genuine Aquatec strainers and compatible spare parts. We ensure quick delivery, product compatibility, and dependable support, so your systems stay protected and efficient.
